Set up rooms in Mammoth Ask mode
A room is a ready-made Ask for a group of people: some of your data, a Today page, Explore files and snippets that everyone in it shares. You pick the room when you invite someone. Only Workspace Owners make and edit rooms, in the Rooms group of the Ask section of the left navigation in Build. See Set up Ask mode for how to get there, and note that the AI Agent and Ask mode are available on Enterprise plans.
Make a room
Click + beside Rooms (New room). The page has three steps, shown along the top: Name and tables, Page and People.
- Name and tables. Type a Room name, then answer "What should this room see?" Pick projects or single files; people in the room see only these. Describe it to the agent asks the agent in Build to set the room up for you instead. Click Next: the room's tables.
- Mammoth then picks the tables worth using from your files ("AI is picking the tables worth using… about half a minute"). Check the list, add or remove tables, and click Confirm tables, which moves you on. Until you confirm, the room is off Ask: "This room is off Ask until you confirm its tables."
- Page. The room's own page opens, with its Today page written from its data. Edit it if you want, then click Next: people.
- People. "Who should see Clinic managers?" Click Invite to choose people, then Done. You can add more later from the room. Nobody is emailed until you send an invite.
In the navigation, a room whose tables aren't confirmed shows Set up, and a room the agent drafted shows Draft.
Tour a room's page
Click a room's name to open it. The head shows its avatar, its name and how many people it is live for ("Live · 3 people"), then Edit page on Today, a gear for Room settings, Preview as and Invite. A draft also has Publish. The tabs sit in two groups:
| Group | Tabs |
|---|---|
| Set up | Room data, Rules, People, Activity |
| Their page | Today, Explore, Dashboards, Snippets |
Most tabs wait until the room has data. Click the avatar to Change the room's avatar; a pick saves at once, and Reset puts the original back.
Choose the room's data and hide columns
Room data lists the room's tables with their Rows and Columns. Add or remove tables changes them. The change reaches everyone in the room, so Mammoth says who loses what before you save.
To keep a column from everyone in the room, open a table's Columns and untick it: "Untick a column nobody in this room should see. It is left out of chat, Today, Explore and boards." If the table has more than one view, View this room reads picks which one the room uses.
Write house rules
Rules is where you tell Ask how to read the room's data: "Tell Ask how to read this room's data. People can add their own rules; yours win if they clash." Add one sentence per rule, for example "Weeks start on Monday" or "Amounts are in GBP". Up to 30 rules apply to everyone in the room. People write their own under Your rules. Room owners can see them, and where a person's rule clashes with a house rule, they see "House rule applies" and the house rule wins.
Test the room
When the agent set the room up, a test line reads, for example, "Tested: 5 of 6 answered". See test lists the questions the agent asked the room, See answer shows how it answered, and Test again asks them again. After a data refresh, Requests tells you if a test question stopped answering.
Set what people can see on their page
- Today: the room's page. Edit page opens its blocks. The first time you open it, Today asks what you want to see first; your answers become everyone's starting page ("Everyone starts with:"), and each person can change theirs.
- Explore: the files on their Explore page the first time they open it.
- Dashboards: published dashboards you add, which people open read-only in Ask.
- Snippets: charts, numbers and notes that go on everyone's page. Each person gets their own copy.
- People and Activity: who is in the room and what they asked.
Publish, invite and preview
- Publish makes a drafted room live: "Published. The room is live; invite people when you're ready."
- Invite opens Invite to the room. See Invite guests to Ask.
- Preview as opens a menu: Everyone (the room's page), or one person. A bar reads "Viewing as Pat Lee:" with Open Pat Lee's Ask and Back to everyone. Edits you make while previewing change the room for everyone.
Change room settings
The gear opens Room settings:
| Setting | What it does |
|---|---|
| Name | Renames the room |
| Allow Explore | "Look through the rows of this data. Off, they can only ask, and can't download anything." |
| Can download data | "A CSV of the rows they filter in Explore, or of a table in an answer." Off for the whole workspace when downloads are off in Ask Settings |
| Who has it | "Given to 3 people". Reset 3 people… makes their access follow the room again and its pages replace theirs |
| Reset asks… | Clears what each person asked to see on Today. Next time they open the room, Today asks again. The room's page, tables, people and chats stay |
Changes to Allow Explore and Can download data wait for a Save that says who loses what.
Delete a room
In Room settings, click Delete room, then Delete to confirm. "People in it keep their access and what was copied to them."
See a room from Ask
Owners switch rooms from the foot of the Ask navigation: Your room ("only you") or any room, each with a status of Ready, Not ready, Not set up or Updating. Once a room has people in it, Viewing as shows the room as you or any member sees it, read-only. See Ask mode.
Related
- Set up Ask mode: turn it on and open the Ask pages.
- Invite guests to Ask: invite someone to a room.
- Manage guests: move people between rooms.
- Answer requests and read Ask analytics: what people asked each room.
Something wrong? support@mammoth.io